In this project I am going to control LEDs with the help of this Stone HMI display. Command data, through Display will send to the Raspberry-pi and this data is in the form of frame because this Display sends data in the form of frame and receive in the frame of HEX code. Here I am using STWI056WT/N-01 model for our in this project, if you want to understand data frame and how it is working? you can download the Datasheet from here .
Hello friends , this project is about game and I think everyone once play this Chrome Dinosaur Game at the time of internet problem. But what about, If this game can be played without any input? yes, you can make this with the help of Arduino and servo-motor. So in this project I am going to use servo motor to press my space/up button. So let's start with this project.
In this I'm going to make a finger counter with the help of media-pipe library and finger count will display on the seven-segment LED. For this will require software and some hardware components and here I'm using C and python because Arduino code is written in C and the sending code that is which is communicating with Arduino is written in Python so let's move further and make this project, below are the list of component and software which you will required in this project.
In this project I'm going to make an LED blink and this is a simplest or I can say first program in the Arduino learning journey. In this project we will use simple delay function to ON and Off an LED and this delay function will convert as a blinking condition. So Let's start with this project below are the list of required components.